IRF9530 Pinout, Equivalent, Features, Applications and Other Useful Info

This post describes IRF9530 pinout, equivalent, features, applications and other useful info about this P channel TO-220 package MOSFET.

 

Features / Technical Specifications

• Package Type: TO-220, TO-220AB And Other Packages
• Transistor Type: P Channel
• Max Voltage Applied From Drain to Source: -100V
• Max Gate to Source Voltage Should Be: ±20V
• Max Continues Drain Current is : -12A
• Drain to Source Resistance in ON State: 0.300 Ohms
• Max Pulsed Drain Current is: -48A
• Max Power Dissipation is: 88W
• Max Storage & Operating temperature Should Be: -55 to +150 Centigrade 

 

Replacement and Equivalent

2SJ380, IRF9530N, IRF9530NL, IRF9530NS, 2SJ380, IRFIP9140, IRF9540, 2SJ464, 2SJ412, IRF9540PBF, SIHF9540

 

IRF9540 MOSFET Explained / Description

IRF9530 is a P channel MOSFET that can be used for wide variety of switching and amplification purposes. The transistor is capable of high speed switching and it is capable to deliver switching speed in nano seconds due to which the designer can use it in applications where high speed switching is crucial.

The maximum load this transistor is capable to drive is -12A and -48A in pulse mode with the max voltage of -100V.

IRF9530 also has low gate driving requirements and low input impedance due to which it can be directly operated from the output of ICs, microcontrollers and electronic platforms like arduino, raspberry Pi etc.

Moreover the transistor also has low rDS(ON) which makes it power efficient and makes it ideal to use in portable and battery operated applications.

 

 

Where We Can Use it & How to Use

IRF9530 MOSFET can be used in wide variety of general purpose switching and amplification purposes. Other than that it can also perform well in high speed switching applications. Furthermore it can also be used for high power audio amplification purposes.

 

Applications

Uninterrupted Power Supplies

Motor Driver Applications

High Speed Switching Applications

Switching Regulators

Relay Driving Applications

Battery Charger Circuits

 

How to Safely Long Run in a Circuit

For getting long life performance from any component we always suggest to use it atleast 20% below from its maximum ratings, therefore it will also apply to IRF9530 MOSFET. The maximum continuous drain current is -12A hence do not drive load of more than 9.6A. The maximum drain to source voltage is -100V hence do not drive load of more than 80V, use a proper heatsink with the transistor and always store or operate this transistor in temperature above -55 degree Celsius and below +150 degree Celsius.

 

Datasheet

To Download the datasheet just copy and paste the below link in your browser.

https://cdn.datasheetspdf.com/pdf-down/I/R/F/IRF9530_InternationalRectifier.pdf